Where to install withstand the pressure of S-type thermocouple temperature measurement devices must ensure tightness. S-type thermocouple thermocouple prices under high temperature, in order to prevent the protective tube produced at high temperature deformation, the general should be mounted vertically, if it is not too long, must be mounted horizontally, and thermocouple protection bracket. If the temperature measuring element is mounted in the medium flow rate in the larger pipe, it should be inclined. In order to prevent the temperature element being subjected to excessive erosion, preferably mounted at the bend pipe. When the medium pressure exceeds 10MPa industrial S-type thermocouple, must be added to protect the coat on the measuring element. Thermocouple / RTD installation site should also consider its disassembly, repair, calibration of adequate space and venues, thermocouple protection tube with a longer thermal resistance should be easily removable. Exposed end thermocouple junction to allow the top down to the surrounding environment, this type can provide the best response time, but only for use in non-corrosive, non-hazardous and non-pressure applications. Response time is a time constant, said time constant is defined as the sensor in the controlled environment between the initial value and the final value of 63.2% of the time change. S-type thermocouple type | Shanghai Automation Instrumentation force measurements (certified) | S-type thermocouple measuring the force provided by the Shanghai Automation Instrumentation Co., Ltd. Shanghai Automation Instrumentation Co., force measurement (www.licesh.com) is the Shanghai Zhabei District, flow meters leaders, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. Since the force measuring device leadership with the staff warmly welcome all inquiries negotiations to create the force measuring instrument since a better future.